TA PENERAPAN SISTEM MANAJEMEN KESELAMATAN DAN KESEHATAN KERJA PADA OPERATOR ALAT BERAT PROYEK PEMBANGUNAN JALAN TOL BALIKPAPAN-SAMARINDA SEGMEN 5

Main Article Content

sri suprihatin

Abstract

This study aims to determine how the implementation of the occupational safety and health management system for heavy equipment operators in the Balikpapan-Samarinda toll road construction segment V and also to find out how the influence of the implementation of the K3 management system on the machine performance of operators.


The sample in this study were all employees of BUCG on the construction project of Balikpapan Samarinda toll road in the Vyang segment totaling 30 respondents. The data collection technique used in this study was the questionnaire/questionnaire method.


From the results of the questionnaire data analysis that has been disseminated it is known that the implementation of workplace safety and health management system for heavy equipment operators in the Balikpapan-Samarinda toll road construction segment V is running well. The majority of heavy equipment operators stated that the management had implemented all the elements in the K3 management system on this project. This can be proven by the results of the questionnaire distributed, knowledge percentage of K3 96.57%, K3 training 88.75%,  application of K3 93%,  performance of the operator of the equipment 97.25%.


Keywords:  Safety & occupational health (K3), the machine operator performance, safety officer.

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
sri suprihatin, “TA PENERAPAN SISTEM MANAJEMEN KESELAMATAN DAN KESEHATAN KERJA PADA OPERATOR ALAT BERAT PROYEK PEMBANGUNAN JALAN TOL BALIKPAPAN-SAMARINDA SEGMEN 5”, JUTATEKS, vol. 3, no. 2, pp. 291 - 302, Sep. 2019.
Section
Articles

References

Arikunto, Suharsimi. 2006. Metodelogi penelitian. Yogyakarta: Bina Aksara
Ary, D., Jacobs, L.C., & Razavieh, A. (1982). Pengantar Penelitian Dalam Pendidikan. (Alih bahasa: Arif Furchan). Surabaya: Usaha Nasional
Dipohusodo, Istimawan. 1995. Manajemen Proyek & Konstruksi jilid 2. Penerbit Kanisius. Yogyakarta.
Ervianto, Wulfram I. 2005. Manajemen Proyek Konstruksi.Yogyakarta: Andi Offset
Fajar Fahrizal,2018. Penerapan Sistem Manajemen Keselamatan Dan Kesehatan Kerja Di Pt Jagat Interindo Pada Proyek Borneo Bay Balikpapan. Tugas Akhir, Diterbitkan, Program Studi Teknik Sipil, JUTATEKS, vol 2 no 1, hal 29-33
Kamus Besar Bahasa Indonesia.
Kawatu,P,A,T.2012. Bahan Kuliah Kesehatan Keselamatan Kerja. Fakultas Kesehatan Masyarakat. Universitas Sam Ratulangi. Manado.
Menteri Tenaga Kerja Peraturan Menteri Tenaga Kerja Nomor: 03a,Ien/98
P.K, Suma’mur. (1981). Keselamatan Kerja dan Pencegahan Kecelakaan. Jakarta: Gunung Agung. 1981.
Ramli.Soehatman.(2007). Tentang Sistem Manajemen Keselamatan dan Kesehatan Kerja. OHSAS 18001: 2007
Sugiyono. (2013). Cara Mudah Menyusun Skripsi, Tesis, dan Disertasi (STD). Bandung: Alfabeta.
Triyas Afrili, 2018. Analisa Produktivitas Alat Berat Pada Proyek Pembangunan Jalan Tol Balikpapan-Samarinda Km 2. Tugas Akhir, Tidak Diterbitkan, Program Studi Teknik Sipil, Politeknik Negeri Balikpapan : Balikpapan.
Sukandar,2015. Peta Lokasi Jalan Tol Kaltim. BAPPEDA PROV.KALTIM : http://bappeda.kaltimprov.go.id/berita/tol-kaltim